Fonera FON 공유기 reset방법
- Unplug the Ethernet cable from the La Fonera.
- Press the reset button located beneath the Fonera and hold it down for 15 to 20 seconds (no more). Use a pen or a paper clip to do so.
- The original firmware will be loaded from a second storage area inside the Fonera. This process takes a couple of minutes to complete. Do not switch off the Fonera during this process.
- Now, the Fonera is back to its default factory configuration: username/password of the Management console are admin/admin, the WPA key is the serial number (S/N: on the sticker beneath the Fonera) and the SSIDs are called 'MyPlace' and 'FON_AP'
- Check if you can connect to 'MyPlace' wireless signal and if you can access the Management Console at http://192.168.10.1Check if everything is back to its default value, so you can see whether or not the reset has been successful.
- If you need special configuration settings (like static IP's or PPPoE settings) please change these settings now.
- Power off the Fonera, and plug it again to the Ethernet cable providing internet access.
- Switch on the Fonera. As it is running with the default firmware it will download the latest firmware version as soon the internet connection is established. The update can take up to 45 minutes. No matter what, do not disconnect power cable while updating it would damage the Fonera.
- During the update the WLAN and Internet LEDs will switch on and off a couple of times. The wireless signals may appear sometimes, if you are able to connect to them you might experience disconnections.
- Once this process ends, both signals will appear continuously and you will be able to connect to both of them.
될지 안될지는 모름.
< 필요한 프로그램 >
http://www.gargoyle-router.com/download.php
http://www.winpcap.org/ winpcap 프로그램이 설치되어 있어야 정상 작동함.